It meets the ever-changing needs in the market.
CI-PC20 Infrared gas analyzer Product Features
Using NDIR (that is, non-dispersive infrared measurement), the sensor is not in contact with the measured gas, and the poisoning of the sensor will not occur;
High stability infrared light source and filter with strong anti-interference ability make the analyzer have good long-term stability;
With microprocessor as the core, it has the characteristics of intelligence, good stability, high precision and long calibration cycle.
Technical Index
| Detection principle | NDIR non-dispersive infrared |
| Measuring range | Please refer to page 62, CI-PC261 |
| Linear error | ±2%FS |
| Repeatability | ±1%FS |
| Zero drift | ±1%FS/7d |
| Range drift | ±1%FS/7d |
| Response time | T₉₀<15s(500ml/min) |
| Power supply | AC 100~240V, 50/60Hz |
| Consumption | <35VA |
| Communication | RS485 (standard)/RS232 (optional) |
| Analog singal | 1 group, 4-20mA/0-20mA/0-1V/0-5V/0-10V/1-5V, can be set mode freely |
| Load:<500Ω | |
| Ambient TEMP. | -10~+50℃ Ambient humidity:<80%RH |
| Sample gas pressure | Atmospheric conditions±10% (Gas outlet should be atmospheric conditions) |
| Negative pressure, slightly positive pressure (optional) when the air pump is configured | |
| Dimensions | W x H x D=275mm x 190mm x 300mm |
The product plays an important role and has been deeply trusted by our customers.